Customer Cases
Customer service cases for elevator parts projects, including control boards, signal boards, door motors, and power boards across Toshiba, Hyundai, Sigma, Mitsubishi, OTIS, and Schindler elevator systems.
39 case studies / Page 1 of 4
Application
Toshiba Elevator CV620
On another Toshiba CV620 project in Saudi Arabia, the I/O-500D board was used for input-output recovery, with terminal signals, controller recognition, safety-related inputs, and output response checked separately from the CCU communication work.
Application
Toshiba Elevator CV620
On a Toshiba CV620 site in Saudi Arabia, the CCU-500B signal board was installed to rebuild car-top communication, with CAN wiring, door command transfer, and cabin-button feedback verified before handover.
Application
HYUNDAI Elevator HYUNDAI
In South Korea and Saudi Arabia, the WBVF-N 2.0 control board was used on HYUNDAI elevators where controller logic and drive-side response had to be checked together before startup.
Application
SIGMA Elevator LG SIGMA
For SIGMA LG SIGMA projects in India and South Korea, the DOP-112 power board was installed to stabilize board-level power support after cabinet connector, seating, and response checks.
Application
Mitsubishi Elevator VFGL
In the Philippines and Russia, the EMB-80-4 door motor was installed on Mitsubishi door systems after technicians confirmed mounting alignment, cable connection, and stable door-cycle behavior.
Application
Mitsubishi Elevator VFGLC
For Mitsubishi elevator service in Russia and Angola, the KCD-1161A P1 board was selected where terminal fit, cabinet wiring, and controller communication had to be verified on site.
Application
Mitsubishi Elevator VFGL
In Thailand and the Philippines, the DOR-160B door power board was used to recover Mitsubishi door-controller power, then tested through output checks and repeated door movement cycles.
Application
Mitsubishi Elevator LEHY-II
For Mitsubishi projects in Tanzania and Zambia, the P203745B000G01 P1 board was fitted to recover board-level control behavior, with cabinet connectors and communication feedback checked before handover.
Application
Mitsubishi Elevator GPS2
In Bahrain and Lebanon, the KCD-701C P1 board was installed in Mitsubishi elevator cabinets to restore access-control and controller communication after connector matching and response testing.
Application
OTIS Elevator GEN2
For OTIS Gen2 projects in Brazil and Mexico, the AAA649J12 steel strip detection head was positioned to monitor belt condition, with cable routing and detection feedback checked before closeout.
Application
OTIS Elevator GEN2
In Russia and Finland, the DAA24270N22 steel strip weighing device was used on OTIS belt-related service work to restore weighing feedback and controller response after cable and signal checks.
Application
OTIS Elevator GEN2
For OTIS passenger panels in Israel and Oman, the A4J43675 push button was installed where the service team needed clean contact response, lighting behavior, and reliable command input from each press.
Need quality elevator spare parts?
Send us your requirements and get a quick quotation from our experienced team.
Direct Email
Send your part number, quantity, or destination country and we will follow up by email.
